MSYH M770 Linen Floor Adhesive

MSYH M770 Linen Floor Adhesive

M770 special glue for linen floor is a kind of high-efficiency water-based adhesive for linen floor special glue, suitable for laying linen coil and sheet floor on absorbent base.

use:

Efficient water-based adhesive for linen-based roll and sheet floors on absorbent substrates.

Features:

Environmentally friendly;

High initial adhesion and strong final adhesion;

Easy to construct, practical and economical;

Long construction time;

After drying to form a film, it is resistant to the impact of furniture steering wheel extrusion;

Economical and practical;

Applicable base:

1. Suitable for porous, absorbent, firm, flat, dry, clean, crack-free, grease-free, wax-free floors;

2. Suitable for hard cement-based self-leveling leveling layer;

3. Suitable for raised wood floors, plywood and particleboard.

grassroots processing:

If the base layer has oil stains, wax water and mold release agent, etc., it needs to be decontaminated with waxing water; it is recommended to use M318 water-based interface agent (porous absorbent base layer) to seal the slightly sandy ground; it is recommended to use the uneven base layer. Meisheng Yaheng self-leveling is used for leveling (leveling thickness is at least 2mm); it is recommended to use two-component epoxy moisture-proof interface agent for moisture-proof treatment on wet base layers. The base layer with cracks is recommended to be repaired with a two-component epoxy material.

technical parameter:

Color: milky white

PH value: 7-8

Density: 1.4kg/L

Dosage: 330-370g/㎡

Waiting time: about 5-10 minutes (varies with humidity and temperature)

Construction time: After the waiting time is over, about 15-20 minutes (varies due to humidity and temperature)

Bearing time: ≥24h

Final setting time: ≥72h

Construction method:

No need to dilute, use B3 toothed squeegee to spread the glue evenly on the construction surface. If there is a film on the surface of the glue after opening, remove it first and then stir. If a small amount of clear liquid is found on the surface after opening the barrel, the glue needs to be stirred evenly before construction. According to the temperature and humidity of the construction site, after waiting for about 5 to 10 minutes (the hand feels a sticky and brushed feeling), you can lay the floor on the surface of the glue, then use a cork pusher to flatten the floor, and then use a roller of more than 50 kg. The press rolls on the paved floor for better results.

Precautions:

If the construction temperature is lower than 15℃ or the relative humidity is higher than 75%, please consult technical advice. If there is a film on the surface of the glue after opening, it needs to be removed first, and it can be used after stirring. Do not pour glue down gutters or sewers. The lid should be sealed after use. The glue residue on the tool can be cleaned with water.

Packaging and Storage:

25kg plastic drum packaging. This product must be stored indoors at 5°C-35°C to prevent freezing and exposure to sunlight. Shelf life is 6 months.