MSYH M1320 Non-absorbent interface treatment agent

MSYH M1320 Non-absorbent interface treatment agent

Suitable for non-absorbent, dense or smooth surface substrates such as stone, terrazzo slabs, ceramic tiles, calendered concrete, asphalt and wood surface substrates. It can also be used in geothermal systems with a maximum temperature of 50°C. However, this product should not be used for dusty, brittle surfaces, metal wood chipboards and base layers of magnesium oxide and calcium sulfate, and M320 cannot be used as a moisture-proof layer. This product can only be used indoors.

use:

For treating non-absorbent and non-porous or smooth surface substrates.

Features:

Environmentally friendly;

short waiting times;

easy construction;

Economical and practical, large coating area;

Suitable for heating the base layer of the floor.

Applicable base layer:

Suitable for non-absorbent, dense or smooth surface substrates such as stone, terrazzo slabs, ceramic tiles, calendered concrete, asphalt and wood surface substrates. It can also be used in geothermal systems with a maximum temperature of 50°C. However, this product should not be used for dusty, brittle surfaces, metal wood chipboards and base layers of magnesium oxide and calcium sulfate, and M320 cannot be used as a moisture-proof layer. This product can only be used indoors.

Construction method:

1. M320 non-absorbent interface treatment agent can be used immediately without adding water.

2. Before use, shake the container evenly, then turn it on for use.

3. Be careful not to pour the product directly on the base layer. It should be poured into the roller tray first, and then use the wool roller to brush the entire base layer evenly and thinly. Be sure to avoid liquid accumulation. The next step of construction can be carried out after the M320 is completely dry.

Precautions:

M320 non-absorbent interface treatment agent is an environmentally friendly, non-flammable, low-volatile special interface treatment product. The best construction environment is the temperature above 15℃ and the relative humidity below 75%. It should be ensured that the construction site is well ventilated.

Packaging and Storage:

20kg plastic drum packaging. This product must be stored indoors at 5°C-35°C to prevent freezing and exposure to sunlight. Shelf life is 12 months.