MSYH M720 plastic sheet floor glue

MSYH M720 plastic sheet floor glue

M720 is a highly efficient water-based adhesive. It is suitable for pasting PVC plastic floors and quartz floors of various materials on the absorbent base. Can paste LVT sheets, carpets, quartz floors, etc.;

use:

Highly efficient water-based adhesive. It is suitable for pasting PVC plastic floors and quartz floors of various materials on the absorbent base.

Features:

Good initial viscosity;

Large unit coating area;

long working hours;

Green and environmental protection, in line with GB 18583-2008 standard.

Applicable base layer:

1. Suitable for porous absorbent, firm, dry, flat, crack-free, grease-free, wax-free floors.

2. Suitable for hard cement-based self-leveling screed.

3. Suitable for raised wooden floors, plywood underlayment or particleboard.

Precautions:

If the construction temperature is lower than 15℃ or the relative humidity is higher than 75%, please consult our technical staff for advice. Do not pour adhesive down sewers or gutters. Unused adhesive should be sealed and stored. Tools can be cleaned with water.

technical parameter:

Color: milky white

PH value: 7-8

Density: 1.1kg/L

Dosage: 110-140g/㎡

Waiting time: about 10 minutes (varies with humidity and temperature)

Construction time: after the waiting time is over, within 10-60 minutes (varies due to humidity and temperature)

Bearing time: ≥72h

Can withstand temperature: withstand temperature 50 ℃ after solidification

Basic treatment:

If the base layer has oil stains, wax water and mold release agent, etc., it needs to be decontaminated with waxing water; it is recommended to use M318 water-based interface agent (porous absorbent base layer) to seal the slightly sandy ground; it is recommended to use the uneven base layer. Meisheng Yaheng self-leveling is used for leveling (leveling thickness is at least 2mm); it is recommended to use two-component epoxy moisture-proof interface agent for moisture-proof treatment on wet base layers. The base layer with cracks is recommended to be repaired with a two-component epoxy material.

Construction method:

No need to dilute, stir well before use, use appropriate scraping teeth (A2 or A3) to apply the adhesive evenly on the surface of the base layer, and then start to lay the floor. After laying, use a 50 kg roller to roll and paste Better results. Laminated sheet floors should be flat.

Packaging and Storage:

20kg plastic drum packaging. This product should be stored indoors at 5°C to 35°C to prevent freezing and exposure. Shelf life is 12 months.