Features:

Good initial adhension; just laying the floor is not easy to shift;

Can withstand steering wheel;

Easy to construction, economic and practical;

Green environmental protection, accord with the standard GB 18583-2008.

Applicable Substrate ：

①Suitable for porous absorbent , strong, smooth, dry , clean, no cracks , no grease, no wax floors.

②Suitable for self-leveling leveling layer.

③Suitable for aerial wood flooring , plywood or particleboard cushion.

Substrate Treatment：

Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment ; recommend M318 Water-Based Primer for closed minor sand ground ( porous absorbent subfloor) ; recommend MSYH Self-Leveling Polymer Cement for leveling uneven ground( leveling thickness at least 2mm); recommend MSYH Two-Component Epoxy Moisture Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend MSYH Two-Component Epoxy Resin Material to repair .

Technical Parameters：

Color: Ivory

PH value: 7-8

Density: 1.4kg / L

Dosage: 200-350g /m²

Wait time: About 10 minutes ( due to temperature and humidity vary )

Can load time: ≥ 24h

Final setting time: ≥ 7d

Construction Method:

Don’t dilution, use the appropriate scraper (A2 scraping tooth) coated the adhesive evenly on the substrate surface. If finding surface with a small amount of clear fluid after opening bucket, need to stir the glue evenly and then construction. According to the temperature and humidity of the construction site and wait for about 10 to 20 minutes (there is a clear sense of drawing) and then laying the floor, then push cork to make flooring flattened and use 50kg rolling device to roll on the paved floor to get better effect.

Precautions:

If the temperature is below 15 ℃ construction or relative humidity above 75%, please consult our technical staff opinion. If mucilage with conjunctiva after opening, need to weed out first, stir evenly before use. Don’t put glue dumped into the sewer or gutterway. Unused glue should be kept sealed. Tools can be cleaned with water.

Packaging and Storage :

25kg plastic drum. This product should be stored at indoor 5 ℃ -35 ℃, prevent freezing, solarization. Shelf life of 12 months.