M735 PVC Tile Flooring Strength Adhesive
Efficient water-based adhesive, Suitable for pasting the vast majority of good texture PVC and CV bulk flooring on the absorbent substrate.
Features:
Environmentally friendly；
High initial adhension,good final adhension；
After curing extrusion impact resistant furniture Steering Wheel；
Dosage economic。
Applicable Substrate：
①Suitable for porous absorbent , strong, dry, smooth , no cracks , no grease, no wax floors .
②Suitable for the hard cement-based self-leveling leveling layer.
③Suitable for aerial wood flooring , plywood or particleboard cushion .
Substrate Treatment：
Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment ; recommend M318 Water-Based Primer for closed minor sand ground ( porous absorbent subfloor) ; recommend MSYH Self-Leveling Polymer Cement for leveling uneven ground( leveling thickness at least 2mm); recommend MSYH Two-Component Epoxy Moisture Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend MSYH Two-Component Epoxy Resin Material to repair .
Technical Parameters：
Color : Ivory
PH value: 7-8
Density: 1.4kg / L
Dosage : 250-350g /m²
Wait time: About 10 minutes ( due to temperature and humidity vary ) Construction time : After the completion of the waiting time in total , about 15-20 minutes (due to temperature and humidity vary)
Can load time : ≥ 24h
Final setting time : ≥ 7d
Construction Method：
Don’t dilution, If finding surface with a small amount of clear fluid after opening bucket, need to stir the glue evenly and then construction. then use the appropriate scraper (A2 scraping tooth) coated the adhesive evenly on the substrate surface, laying floor on the mucilage afer waiting about 10 minutes. After pasting, use rolling device to roll,in order to achieve a uniform paste effect. Paving blocks floor should be smooth. The application of MSYH M735 PVC strength sheet flooring adhesive, should meet the minimum environmental conditions and ways of China building materials industry standards JC/T550-2008 regulations.
Precautions：
If the temperature is below 15 ℃ construction or relative humidity above 75%, please consult our technical staff opinion. If mucilage with conjunctiva after opening, need to weed out first, stir evenly before use. Don’t put glue dumped into the sewer or gutterway. Unused glue should be kept sealed. Tools and residual glue can be cleaned with water .
Packaging and Storage：
25kg plastic drum. This product should be stored at indoor 5 ℃ -35 ℃, prevent freezing, solarization. Shelf life of 12 months.
