Features:

Automatic leveling, after 24 hours can be laid finish materials;

Construction thickness of 2-4mm;

Recommended for laying SPC, WPC, wood flooring, carpet, tile;

Recommended for home, office, small business.

Primary Treatment:

①The primary must be dry, firm , bearing , dust, debris hinder bonding , smooth surface .

②Has a good compressive strength.

③Using M318 multi-function water-based primer.

Technical Parameters:

Mixing ratio : 25kg powder :6-6.5L water

Coverage : Approximately 3.5kg/m²·2mm

Flooring may need time: About 24 hours later

Compressive strength : ≥ 16MPa (28 days )

Flexural strength : ≥ 4MPa (28 days )

Construction Method:

①A subfloor clean up after the first selection M318 aqueous primerbrushing the subfloor, when the primerhas been absorbed by the subfloor(about 2 to 4 hours after construction) , construction began leveling .

②After the addition of about 6.5L of water in a container , then slowly added to a bag leveling 25kg stirred with mixer for 3-5 minutes , pour the mixture was uniformly spread with a special blade tooth mouth control the thickness of the mixture must be used as soon as possible, just to prevent the construction of a good self-leveling direct sunlight and strong wind blowing .

③The initial setting before leveling with anti-foaming rollers rolling ground to exclude when mixed into the air.

Note:

As the product contains cement , reacts with water to produce highly alkaline , avoid contact with skin, eyes ; once contact, immediately flush with water ; If skin or eye injury , seek immediate medical attention . This product will not produce the body , environmental impact material after hardening .

Packaging and Storage:

25kg composite bag . The product shall be kept indoors , pay attention to moisture , prevent freezing, exposure. Stacked on pallets no more than eight layers , Under the condition of good moisture-proof measures Shelf life is 6 months.