Technical parameters:

Color : Ivory

State: Liquid

The solid content:≥36%

Density: About 1.1kg/L

Consumption: About 100-150g/ m² (Dosage for reference, due to different levels of base loose condition)

Applicable Substrate:

Aqueous emulsion interface reinforcing agent, used for absorbent ground base such as concrete, cement mortar, for slightly sand ground on the surface have superior penetration, reinforced base strength, at the same time closed base pores and cracks, reduce the absorption of the porous base. With certain moistureproof effect. After reinforcing base can use MYH self leveling leveling layer construction.

Substrate Treatment:

The base has porous absorbent, smooth, dry, clean, no cracks, no oil, release agent and other chemical additives. The residual material is soft or surface must be completely removed by washing or shot.

Note Matters：

M139 moisture-proof reinforcement agent suitable for use at 5℃-35℃ temperature. The substrate need to smooth, dry, the substrate surface should be clean before construction, is not recommended for outdoor use, this product has a slight corrosion of steel, should pay attention to the use. The data was acquired in 23℃±2℃temperature and relative humidity under

50-55%. Please note,in other climates, the drying time will be extended or 

shortened.

Construction Method:

1.Remove the surface layer of unstable loose material, oil, etc.;

2.The reinforcing agent is diluted with water according to the absorption of the base, and coated with a roller brush to ensure complete penetration;

3.To get better enhance the effect, can besmear brush many times.

Packaging and Storage:

20Kg plastic barrel. This product should be stored in the indoor 5℃-35℃, to prevent frost and solarization. Shelf life is 12 months.